MCR 2015-2026 Ford F-150 Brushless Fuel System

Take your F-150 fuel system to the next level with the MCR Single Brushless Fuel System, designed for high-horsepower 5.0L Coyote F-150 applications.

Built around the Injector Dynamics E5LM brushless fuel pump and BPC100 brushless pump controller, this system provides the fuel delivery needed for serious boosted and E85 combinations without the complexity of a traditional multi-pump setup.

The system also features the MCR Plug-and-Play BPC harness, designed specifically for the F-150 to simplify installation and integrate the brushless pump controller with the factory fuel-pump-control system.

Why Go Brushless?

Instead of relying on multiple traditional fuel pumps, the MCR system utilizes a high-output Injector Dynamics E5LM brushless pump controlled by the BPC100.

Benefits include:

• Single high-output brushless fuel pump
• Supports approximately 1,000-2,000+ WHP depending on fuel, pressure, injectors, and vehicle combination
• Injector Dynamics BPC100 brushless pump controller
• MCR Plug-and-Play F-150 wiring harness
• Designed for boosted and high-horsepower Coyote applications
• Excellent solution for E85 and ethanol-based race fuel applications
• Eliminates the complexity of traditional dual and triple-pump configurations
• Fuel-control bucket helps maintain fuel supply during hard acceleration and cornering
• Retains the OEM fuel-level sender
• Designed to maintain fuel pickup at low fuel levels

What's Included

The MCR Brushless Fuel System includes:

• Injector Dynamics E5LM brushless fuel pump
• Injector Dynamics BPC100 controller
• MCR BPC mounting bracket
• MCR Plug-and-Play BPC/pump harness
• High-current power wiring
• Ground wiring
• BPC I/O harness
• MAP sensor harness
• Fuel-level harness
• 120A circuit breaker
• Rife 7-Bar MAP sensor
• Billet fuel pump top hat
• Fuel-control bucket
• Billet center section
• OE fuel-level sender compatibility
• -10AN feed
• -8AN return
• M5 stainless bulkhead studs
• Required installation hardware

The MCR PNP electrical kit includes the BPC/pump, I/O, MAP and fuel-level harnesses along with the power and ground wiring, 120A circuit breaker and 7-Bar MAP sensor. Instructions F150 PNP KIT ID BPC

Plug-and-Play BPC Integration

The included MCR Plug-and-Play harness is designed to simplify installation of the Injector Dynamics BPC100 into the F-150.

The harness integrates with the factory fuel-pump-controller wiring and includes the necessary connections for the BPC, MAP sensor, fuel-level system, pump power and ground.

This reduces custom wiring and makes the system much easier to install compared with building a brushless fuel system from individual components.

Vehicle Fitment

Designed for:

2015-2025 Ford F-150 5.0L Coyote

Ideal for:

• Naturally aspirated high-horsepower builds
• Supercharged F-150s
• Turbocharged F-150s
• Twin-turbo F-150s
• E85 applications
• Street/strip trucks
• Dedicated race builds

Fuel Pump Module Features

The fuel pump module is designed around high-performance F-150 applications while retaining important factory functionality.

Features include:

• Billet top hat construction
• -10AN feed
• -8AN return
• Stainless bulkhead connections
• Billet center section
• Integrated fuel-control bucket
• Retains the OEM fuel-level sender
• Designed to maintain consistent fuel supply during acceleration and cornering
• Fits the factory fuel-tank retaining-ring location

Horsepower Capability

The MCR Brushless Fuel System is designed for applications ranging from approximately 1,000 WHP to 2,000+ WHP.

Actual horsepower capability will vary based on fuel type, base and boost fuel pressure, injector size, engine combination, electrical system and other vehicle-specific factors.

For extreme-power applications, contact MCR before ordering so we can help determine the correct configuration for your build.

Frequently Asked Questions

Is this a single-pump fuel system?

Yes. The system uses a single Injector Dynamics E5LM brushless fuel pump controlled by an Injector Dynamics BPC100.

Does it require multiple fuel pumps?

No. One of the major advantages of this system is the ability to support serious horsepower without a traditional dual or triple-pump configuration.

Is the wiring plug-and-play?

The included MCR harness is designed specifically to simplify BPC100 installation in the F-150 and interface with the factory fuel-pump-controller wiring.

Does it retain the factory fuel gauge?

Yes. The fuel pump module is designed to retain the OEM fuel-level sender.

Can I run E85?

The system is designed with high-performance ethanol applications in mind. Always use fuel and maintenance practices appropriate for your specific combination.

Does the kit include fuel lines?

Fuel lines are available separately unless otherwise specified in the selected product options.

Can I use this on a high-horsepower twin-turbo F-150?

Yes. This system was designed specifically with high-horsepower boosted F-150 applications in mind.

Professional Installation Recommended

Professional installation is strongly recommended.

Improper wiring, grounding, fuel-system assembly or BPC configuration can damage the fuel pump, controller or vehicle. Follow the supplied MCR, DeatschWerks and Injector Dynamics installation instructions where applicable.

FUEL Available LINES SEPARATELY! https://murcarrace.com/products/mcr-fuel-line-kit-f150?utm_source=copyToPasteBoard&utm_medium=product-links&utm_content=web

INSTRUCTIONS

2015-2023_Ford_F-150_X3_Module_Install_Instructions.pdf

https://cdn.shopify.com/s/files/1/0845/5884/0098/files/Instructions_F150_PNP_KIT_ID_BPC.pdf?v=1787934405